paulbsd/pinephone-keyboard
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
96 Commits 1 Branch 0 Tags 11 MiB
ce4fc78b16
Commit Graph

96 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Paul
ce4fc78b16 fix on keyboard locked-keys 2022-06-04 00:03:58 +02:00
Ondrej Jirman
91163251e6 Don't exit the debugger on I2C communication errors, just report them 2022-02-02 10:45:17 +01:00
Ondrej Jirman
5e365d71d1 Improve inputd error reprting 2022-02-02 08:53:05 +01:00
Ondrej Jirman
d585c744e3 Remove selftest 2022-02-02 08:39:54 +01:00
Ondrej Jirman
4a65f41988 Don't do probing at startup 2022-02-02 08:39:11 +01:00
Ondrej Jirman
6bc1736857 Inputd improvements 
- retry reading kb data after interrupt if the first read fails
- poll for data when the key is pressed to detect missed interrupts
- report issues
 2022-02-02 08:38:48 +01:00
Ondrej Jirman
2da55b7d62 Build only the tools by default 2022-02-02 08:36:18 +01:00
Ondrej Jirman
024d52263e Fix charger status reporting (VIN overvoltage/low load bits were swapped) 2022-01-19 03:32:34 +01:00
Ondrej Jirman
013149dc89 Disable the self-test binary build (it doesn't work anyway) 2022-01-18 02:07:26 +01:00
Ondrej Jirman
f681795424 ENOENT means the i2c userspace device driver is missing 2022-01-17 16:08:27 +01:00
Ondrej Jirman
75b7cdaed2 Add some helpful messages 2022-01-17 16:06:01 +01:00
Ondrej Jirman
13bf8c43ca Update TODO 2022-01-16 17:00:46 +01:00
Ondrej Jirman
3ade80f425 Add support for Pinephone Pro 2022-01-16 17:00:03 +01:00
Ondrej Jirman
af4009e3bf Make kmap.h build more resilient 
Building with missing php resulted in empty kmap.h
 2022-01-15 23:53:04 +01:00
Ondrej Jirman
a1978d22ed i2c-charger-ctl doesn't need the INT gpio access, remove it 2022-01-12 13:45:13 +01:00
Ondrej Jirman
a4ca2223e1 Compile with -Wall and fix issues this revealed 2022-01-12 13:37:48 +01:00
Ondrej Jirman
457e5658d9 Add missing argument to error reporting functions 2022-01-12 13:37:12 +01:00
Ondrej Jirman
7830c7986f Fix writing charger registers (result detection was broken) 2022-01-12 13:36:47 +01:00
Ondrej Jirman
31c41b7d9e Drop I2C bit functions, to make timing easier to modify 
I2C to the charger now has clean 100kHz timing. One read command now takes
400us, and one write command takes 300us to execute.
 2021-09-05 02:26:55 +02:00
Ondrej Jirman
78c72fe448 Make register define order less confusing 2021-09-05 02:07:12 +02:00
Ondrej Jirman
a049cd5107 Make charger tool read/write data from charger via MCU I2C proxy commands 2021-09-05 02:06:57 +02:00
Ondrej Jirman
21374993b3 Allow to reset to stock firmware from user firmware by holding pine+f+h 2021-09-05 01:58:48 +02:00
Ondrej Jirman
0b280ebc14 Fix I2C bit banging code 2021-09-05 01:57:58 +02:00
Ondrej Jirman
bf0c0e9c97 Make i2c flasger reset the app block flag 2021-09-05 01:53:42 +02:00
Ondrej Jirman
574d68aa89 fw: Change to bit-banging I2C implementation for charger comm 
New code, compiles, but it's not tested yet!
 2021-09-01 00:48:27 +02:00
Ondrej Jirman
4a1abce0eb Update inputd to make it work with the latest firmware API 2021-08-31 19:01:43 +02:00
Ondrej Jirman
62e2ebe7ec Fix keymap generator, drop prototype keymap 2021-08-31 19:00:49 +02:00
Ondrej Jirman
f1e3f6dce6 Drop prototype keyboard build 2021-08-31 19:00:18 +02:00
Ondrej Jirman
3c02d41c4b Add final PCB photos/schematics 2021-08-31 15:09:21 +02:00
Ondrej Jirman
fa19294d05 Dump option ROM when reading flash over USB 2021-08-31 14:29:50 +02:00
Ondrej Jirman
0e4f426dfb Add bin2pgd tool 
This is used by the vendor's flashing tool. It's ROM image + option
ROM image appended (256 bytes).

Option ROM contains some flags and configuration data for the MCU.
Things like oscillator configuration, HW reset pin enable, data EEPROM
enable, etc.
 2021-08-31 14:29:21 +02:00
Samuel Holland
246aaaa42e firmware: Statically allocate keys array 
Allocating the array on the stack before initializing the stack pointer
does not work.
 2021-08-05 21:17:09 -05:00
Samuel Holland
3c6488b99e Disable I2CA in all firmware builds 
It is unlikely that any future revision of the hardware will use I2CA.
 2021-08-05 21:17:09 -05:00
Samuel Holland
3107546c04 Revert "firmware: Make interrupt signal shorter (10us)" 
The longer duration is actually required, likely due to debouncing
applied on the SoC side. Even 50us was unreliable.

This reverts commit 3b723583e7.
 2021-08-05 21:17:09 -05:00
Ondrej Jirman
ee438569e3 Update TODO 2021-08-05 03:40:40 +02:00
Ondrej Jirman
f8b901e832 firmware: Add final/proto-v3 builds 2021-08-05 03:40:07 +02:00
Ondrej Jirman
c5c155ca68 firmware: Allow to prevent jump to user fw after powerup by pressing Pine + F + H 2021-08-05 03:33:04 +02:00
Ondrej Jirman
b244ab9c9f firmware: Set stack pointer to a correct value 2021-08-05 02:51:51 +02:00
Ondrej Jirman
bd58af96d2 Update TODO 2021-08-05 02:29:45 +02:00
Ondrej Jirman
c195dabe04 firmware: Whitespace 2021-08-05 02:29:36 +02:00
Ondrej Jirman
15d477f5ba firmware: Fix I2C A forwarding mode 
- add charger INT check prior to transaction via P87
- re-route POGO int to P84
- wrong macro name, fix CONFIG_I2C_A=0 mode
 2021-08-05 02:29:23 +02:00
Ondrej Jirman
c55f0a44d5 firmware: Post-revert fixup 2021-08-05 02:27:39 +02:00
Ondrej Jirman
4e89074513 Revert "firmware: Move more of the USB shutdown control to usb_enable/usb_disable" 
This reverts commit 134b4b6a8b.
 2021-08-05 00:54:46 +02:00
Ondrej Jirman
f0f49c0fbc Revert "firmware: Implement USB enabled/disable control via I2C" 
This reverts commit 176a2da7e2.
 2021-08-05 00:54:39 +02:00
Ondrej Jirman
7f1655be83 firmware: Don't trigger stop twice in i2c_a_read 2021-08-05 00:50:43 +02:00
Petr Vaněk
b3412ee2a4 README.flashing: fix few typos 
to user -> to use -- in second paragraph of Flashing over USB section
users stock stock -> uses stock -- in first paragraph of Flashing over I2C section
fiwmare -> firmware -- in second paragraph of Flashing over I2C section
 2021-08-02 12:18:34 +02:00
Ondrej Jirman
5bef4c8832 Update TODO and I2C interface description 2021-08-02 12:13:56 +02:00
Ondrej Jirman
5fd891ecc0 firmware: Guard the timer manipulation macro argument 2021-08-02 11:53:31 +02:00
Samuel Holland
394af632aa firmware: Allow to read/write single registers from a charger 
This code uses existing system command functionality. The I2C
registers are placed in front of system command register, to
allow for a single transaction proxied I2C A reads/writes.

Not tested, yet.
 2021-08-02 11:52:54 +02:00
Ondrej Jirman
c3272eb4ef firmware: Drop POLL mode from the register definition 
Polling mode was supposed to help with broken keyboard matrix, where
some keys are stuck, but this is handled well by the pre-existing code
already, so there's no need for this.
 2021-08-02 10:23:42 +02:00