Update I2C spec
This commit is contained in:
parent
541c1ae17a
commit
2185fdaae5
@ -42,21 +42,37 @@ Registers
|
|||||||
|
|
||||||
0x70: Flashing mode unlock key
|
0x70: Flashing mode unlock key
|
||||||
(writing 0x46 to this register unlocks the flashing mode.)
|
(writing 0x46 to this register unlocks the flashing mode.)
|
||||||
|
|
||||||
0x71: Flashing control
|
0x71: Flashing control
|
||||||
Writing various commands to this register makes the MCU execute them,
|
Writing various commands to this register makes the MCU execute them,
|
||||||
if the MCU is not executing the previous command. Available commands:
|
if the MCU is not executing the previous command. Available commands:
|
||||||
|
|
||||||
0x52 - read a block of data from code ROM
|
0x52 - read a block of data from code ROM
|
||||||
0x57 - write a block of data to code ROM
|
0x57 - write a block of data to code ROM
|
||||||
0x45 - erase the code rom memory block (128B)
|
0x45 - erase the code rom memory block (128B)
|
||||||
0x43 - confirm the validity of the firmware and enable redirection
|
0x43 - confirm the validity of the firmware and enable redirection
|
||||||
to it from the main app (this redirection is automatically
|
to it from the main app (this redirection is automatically
|
||||||
disabled before executing the 0x57 command)
|
disabled before executing the 0x57 command)
|
||||||
|
|
||||||
|
This register will ignore further commands as long as the last operation
|
||||||
|
is still in progress. This register will contain the code of the
|
||||||
|
currently executed operation, and will be cleared after the operation
|
||||||
|
finishes. Completion is also signalled by pulsing the INT pin shortly.
|
||||||
|
|
||||||
|
If the operation fails, this register will contain value 0xff. If it
|
||||||
|
succeeds it will contain value 0x00.
|
||||||
|
|
||||||
0x7d: target address low byte
|
0x7d: target address low byte
|
||||||
0x7e: target address high byte
|
0x7e: target address high byte
|
||||||
|
|
||||||
0x7f: CRC8 calculated for the 128B block of data from 0x80-0xff
|
0x7f: CRC8 calculated for the 128B block of data from 0x80-0xff
|
||||||
- this must be written by the user when preparing data for write
|
- this must be written by the user when preparing data for write
|
||||||
operation
|
operation, MCU checks the CRC8 of the data and compares it against
|
||||||
- this is update by the MCU after reading the data from flash memory
|
the value in this register before starting the execution of
|
||||||
|
0x57 command
|
||||||
|
|
||||||
|
- this is updated by the MCU after reading the data from flash memory
|
||||||
|
|
||||||
0x80: 128B block of EEPROM data (either read from code memory or to be
|
0x80: 128B block of EEPROM data (either read from code memory or to be
|
||||||
... written)
|
... written)
|
||||||
0xff
|
0xff
|
||||||
|
Loading…
Reference in New Issue
Block a user