Go to file
Ondrej Jirman cea046008f Increase the default flashing area size to 0x2000
This does two things:
- more reasonable default because stock firmware size is larger than
  the previous default
- it will overwrite 0x3fff with 0xff, so that after flashing stock
  firmware the user firmware is automatically disabled
2021-06-28 15:36:58 +02:00
docs Initial commit 2021-06-14 00:10:49 +02:00
firmware Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
keymaps Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
.gitignore Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
common.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
COPYING Initial commit 2021-06-14 00:10:49 +02:00
HACKING Add HACKING file 2021-06-16 14:32:28 +02:00
i2c-charger-ctl.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
i2c-debugger.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
i2c-flasher.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
i2c-inputd.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
i2c-selftest.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
Makefile Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
README Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
README.flashing Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
README.i2c-intf Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
TODO Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
usb-debugger.c Implement flashing over I2C and user/stock firmware support 2021-06-28 15:09:47 +02:00
usb-flasher.c Increase the default flashing area size to 0x2000 2021-06-28 15:36:58 +02:00

FOSS firmware for pinephone keyboard
====================================

Features:

- Dual firmware architecture: stock firmware + optional user firmware.
- Stock firmware implements the full functionality of the keyboard.
  - Stock firmware is layout independent, it reports the raw status
    of the whole keyboard matrix.
  - Key maps and combinations can be arbitrarily changed in the keyboard
    driver without re-flashing the firmware.
  - Stock firmware should be sufficient for most users who will not want
    to do HW modifications to their keyboard to add more peripherals to
    the keyboard MCU.
  - Power efficient implementation using power-down feature of the MCU
    to save power as much as possible. (currently: 9 mW when idle, 20mW
    in active scanning mode - with at least one key pressed)
- Stock firmware is flashed in factory and allows flashing user firmware
  from the pinephone itself over I2C interface.
- User firmware can be used either for updates or for customizations
  (SW support for HW modifications of the keyboard)
- USB stack and tools for stock firmware flashing using ELAN's original
  bootloader to ease development of the stock firmware.
- Self-testing features to quickly test for issues with the keyboard matrix.
- Fully based on FOSS software, with no dependencies. You only need
  sdcc 4.1+ to build the firmware.

See demo video https://megous.com/dl/tmp/kb.mp4 and some technical overview https://xnux.eu/log/

You can support the project via donations at https://xnux.eu/contribute.html#toc-donations

See also Samuel's kernel driver:

  https://github.com/smaeul/linux/commits/wip/pp-keyboard

Enjoy!

	~megi